Subject: kernel config file update (#84)
Index:	sys/config/config,GENERIC 2.11BSD

Description:
	There is an extraneous line now (after #83) in the kernel config
	files.

Repeat-By:
	By observation.

Fix:
	Only the GENERIC, KAZOO and VAX config file differences are
	included.  You should go into each config file present on the system
	(typically those files in /sys/config which are all uppercase)
	and make the corresponding change.

	Included in this update is the beginning of support for
	the DELQA-YM ethernet board.  The driver is still in the debug
	stage, so patches to the Makefiles* are not included at this time.
	Be sure to add the "NQT" line though, it will be needed at a later
	date.

	The "config" shell script is updated to 1) not look for the TMSCP_VEC
	line and 2) accept the NQT line.

	To apply patches (they were all created with full pathnames) use
	the "-p0" option of the 'patch' program:

		patch -p0 < the_file_below
==============================cut here============================
*** /sys/conf/GENERIC.old	Sun Dec 22 16:09:46 1991
--- /sys/conf/GENERIC	Thu Nov 19 21:06:31 1992
***************
*** 325,331 ****
  NTMSCP		1		# TMSCP controllers
  NTMS		1		# TMSCP drives
  TMSCP_DEBUG	NO		# debugging code in TMSCP drive (EXPENSIVE)
- TMSCP_VEC	0260		# base of TMSCP interrupt vectors (OCTAL!!!)
  
  #########################################
  # PERIPHERALS: TERMINALS		#
--- 325,330 ----
***************
*** 377,382 ****
--- 376,382 ----
  NIL		0		# Interlan Ethernet
  NSL		0		# Serial Line IP
  NQE		0		# DEQNA
+ NQT		0		# DEQTA (DELQA-YM, DELQA-PLUS)
  NVV		0		# V2LNI (Pronet)
  NACC		0		# ACC LH/DH ARPAnet IMP interface
  PLI		NO		# LH/DH is connected to a PLI
*** /sys/conf/KAZOO.old	Sun Dec 22 16:11:27 1991
--- /sys/conf/KAZOO	Thu Nov 19 21:06:53 1992
***************
*** 326,332 ****
  NTMSCP		0		# TMSCP controllers
  NTMS		0		# TMSCP drives
  TMSCP_DEBUG	YES		# debugging code in TMSCP drive (EXPENSIVE)
- TMSCP_VEC	0260		# base of TMSCP interrupt vectors (OCTAL!!!)
  
  #########################################
  # PERIPHERALS: TERMINALS		#
--- 326,331 ----
***************
*** 378,383 ****
--- 377,383 ----
  NIL		0		# Interlan Ethernet
  NSL		1		# Serial Line IP
  NQE		1		# DEQNA
+ NQT		0		# DEQTA (DELQA-YM, DELQA-PLUS)
  NACC		0		# ACC LH/DH ARPAnet IMP interface
  PLI		NO		# LH/DH is connected to a PLI
  NIMP		0		# ARPAnet IMP 1822 interface
*** /sys/conf/VAX.old	Sun Dec 22 16:12:46 1991
--- /sys/conf/VAX	Tue Oct 13 20:46:49 1992
***************
*** 371,376 ****
--- 371,377 ----
  NIL		0		# Interlan Ethernet
  NSL		1		# Serial Line IP
  NQE		1		# DEQNA
+ NQT		0		# DEQTA (DELQA-YM, DELQA-PLUS)
  
  # The following devices are untested in 2.10BSD; some are untested since
  # before 2.9BSD.  Some won't even compile.  Most will require modification
*** /sys/conf/config.old	Sun Dec 22 16:14:29 1991
--- /sys/conf/config	Thu Nov 19 21:04:42 1992
***************
*** 250,255 ****
--- 250,256 ----
  echo "#define LP_MAXCOL	$LP_MAXCOL"	>> ../$MACHINE/lp.h
  echo "#define NPTY	$NPTY"		> ../$MACHINE/pty.h
  echo "#define NQE	$NQE"		> ../$MACHINE/qe.h
+ echo "#define NQT	$NQT"		> ../$MACHINE/qt.h
  echo "#define NRAM	$NRAM"		> ../$MACHINE/ram.h
  echo "#define NRK	$NRK"		> ../$MACHINE/rk.h
  echo "#define NRX	$NRX"		> ../$MACHINE/rx.h
***************
*** 259,265 ****
  echo "#define NTS	$NTS"		> ../$MACHINE/ts.h
  echo "#define NTMSCP	$NTMSCP"	> ../$MACHINE/tms.h
  echo "#define NTMS	$NTMS"		>> ../$MACHINE/tms.h
- echo "#define TMSCP_VEC	$TMSCP_VEC"	>> ../$MACHINE/tms.h
  if [ $TMSCP_DEBUG = YES ]; then
  	echo "#define TMSCP_DEBUG"	>> ../$MACHINE/tms.h
  fi
--- 260,265 ----
